Home 5 min read24 October 2026Last updated 25 October 2026

How do you mount a sign? Adhesive, screws and stand-offs

Adhesive, screws or stand-offs? Here you see how door signs, house numbers, restroom signs and safety signs are mounted, and how to get them to sit well.

Skilti og merkingarA father-and-son team in a workshop in Reykjanesbær
Acrylic door sign - nameplate for your doorCut-out acrylic house numbersRectangular restroom sign - choose the symbols
Contents of the post

    Most signs are fixed with adhesive on the back, which holds best on a clean, dry and smooth surface. Door signs are adhesive only. On WC signs and safety signs you can ask for holes and screws, and house number plates come with adhesive or standoffs that hold the plate 25 mm from the wall.

    The film comes off a cut-out house number before it goes on the wall.
    The film comes off a cut-out house number before it goes on the wall.

    Most of our signs arrive ready to put up, with adhesive on the back. On some you can choose screws or standoffs instead. Here we go through what applies to each product and how to get the sign to sit well.

    What fixing applies to each product?

    SignFixing
    Door signsAdhesive on the back, only
    WC signsAdhesive, or holes and screws on request
    Safety and information signsAdhesive, or holes in the corners and screws on request
    Individual house number digitsDouble-sided adhesive
    House number platesAdhesive or standoffs

    How do I prepare the surface?

    Whichever fixing you choose, the surface matters most. Adhesive holds best on a clean, dry and smooth surface.

    • Clean the surface and let it dry completely.
    • Measure and mark the spot lightly with a pencil or masking tape before you take the film off the adhesive.
    • Press the sign on firmly, especially at the corners.

    A sign that has been glued is hard to move, so take your time with the measuring.

    How are door signs fixed?

    The door signs come with adhesive on the back only. You need neither a drill nor screws.

    Put the sign where the eyes land when you stand at the door. On most doors that is above the door handle or beside the peephole.

    How are WC signs fixed?

    The WC signs also come with adhesive. If you would rather screw them up, for example onto tiles or a wall next to the door, you can ask for holes and screws. Write it in the field Athugasemd til okkar (Comment to us) on the product page.

    How are safety and information signs fixed?

    The safety and information signs always come with adhesive on the back. If you want to screw them up we drill holes in the corners and screws are included, at no extra cost.

    Screws are a good choice outdoors on a rough surface, for example a concrete wall or a fence, where adhesive cannot grip well. On a smooth surface indoors the adhesive is enough.

    On the Recording in progress sign you choose the holes directly on the product page.

    Recording in progress sign - CCTV warning sign
    Product in this post

    Recording in progress sign - CCTV warning sign

    You choose the holes directly on the product page.

    from 5.490 kr.View product

    How are individual house number digits fixed?

    The cut-out house numbers come with double-sided adhesive on the back, and they are very easy to put up.

    What matters most is that the digits line up straight. A good tip is to stick a line of masking tape on the wall, line the digits up against it, and take the tape off once the digits are in place.

    Should house number plates have adhesive or standoffs?

    On the rectangular house number plates and the plates with an address you choose between adhesive and standoffs.

    Adhesive keeps the plate flat against the wall. It is the simplest and suits a smooth wall.

    Standoffs hold the plate 25 mm from the wall. That gives shadow and depth, and the plate seems to float in front of the wall. The standoffs come in silver or black. They are screwed into the wall through holes in the plate, so you need a drill.

    Standoffs are also a good choice on a rough wall, because the plate then does not need to lie flat against it.

    When should I decide on the fixing?

    The holes are drilled by us before the sign is sent, so it pays to decide on the fixing right away. On most signs you write it in the field Athugasemd til okkar (Comment to us) on the product page, and on some you choose it directly on the product page. If you are in doubt, adhesive is the safest choice on a smooth surface, because then you need no tools.

    What if the sign needs to come off?

    A glued sign is meant to stay. If you know the sign will be moved later, for example in rented housing, it is better to choose screws where that is available.

    Frequently asked questions

    Do screws come with door signs? No, door signs are adhesive only. The adhesive is on the back when the sign arrives.

    Does it cost extra to get holes for screws? No, not on safety and information signs. There we drill holes in the corners and screws are included at no extra cost.

    How far do the standoffs stand from the wall? 25 mm. It gives the plate shadow and depth.

    Is it hard to put up the individual house number digits? No, they come with double-sided adhesive and are very easy to put up.

    Not sure?

    If you do not know which fixing suits your wall or door, feel free to send us a photo at sm@skiltiogmerkingar.is or through contact us. You can also drop by at Hólmbergsbraut 9a in Reykjanesbær and get advice.

    Read next

    Related posts.

    All the advice
    Audience page

    Everything for the home.

    Signs for the home. Doors, house numbers, mailbox and gifts, made to order in Reykjanesbær and delivered to your door.

    See the signs